27ft Wide Sheep House

Specifications

  • Overall Height: 10ft 5in
  • Straight Side: 3ft 3in
  • Head Room at 1ft in from Side: 5ft 5in
  • Distance Over Hoop: 39ft 4in
  • Steel Diameter: 60mm
  • Steel Specification: Z35 high tensile galvanised

Our 27ft wide Sheep House is supplied as a complete unit ready for assembly onto a soil base and includes ALL of the following as standard:

  • An all-steel framework including foundation tubes, hoops, corner and roof stabilisers, and Triple Ridge.
  • 16ft wide timber door/end frame at each end.
  • 720 gauge/180 micron Premier White polythene cover.
  • Ventilation/Windbreak Netting around both sides and ends.
  • Anti Hot Spot Tape.
  • Timber Base Rails.
  • Timber Side Rails.

Due to the size of this structure, we recommend the foundation tubes are concreted in position.

Select Length

Optional Extras

Step 1 - Cover

 
Was
Now
Info

Premier White Polythene - 720 gauge

-

£0.00

Close

A Premier Sheep House uses a 720 gauge/180 micron polythene cover, which is white on the outside to reflect the sun’s heat and on the inside to give a cool, light interior. Light transmission is reduced to 45%, reducing the temperature inside the sheep house while still ensuring that, during daylight hours, the sheep can be seen and inspected clearly by the farmer. This polythene can be expected to last for 8-10 years.

Step 2 - Front Door

 
Was
Now
Info

Sheep House Door Frame

-

£0.00

Close

The open ends of a Premier Sheep House are supported with a timber door frame measuring from 10ft wide up to 16ft wide x approx 7ft high, allowing access for machinery. (Openings can vary).

Step 3 - Rear Door

 
Was
Now
Info

Sheep House Door Frame

-

£0.00

Close

The open ends of a Premier Sheep House are supported with a timber door frame measuring from 10ft wide up to 16ft wide x approx 7ft high, allowing access for machinery. (Openings can vary).

Step 4 - Select Base Plates (if required)

 
Was
Now
Info

Base Plate Kit (for hard standing base)

-

£140.00

Close

FOR FIXING POLYTUNNELS TO HARD STANDING.

These are used to replace foundation tubes when fixing a sheep house polytunnel to hard standing, such as concrete or flags. Cage bolts are supplied for fixing and the polytunnel framework simply slots into position.

Base plate kits are also supplied with angle brackets and cage bolts for fixing timber door posts to the ground.

27ft Wide Sheep Housing Lengths










27ft Wide Sheep Housing Lengths
Additions (Sheep Housing) (27ft x 30ft)
Additions (Sheep Housing) (27ft x 36ft)
Additions (Sheep Housing) (27ft x 42ft)
Additions (Sheep Housing) (27ft x 48ft)
Additions (Sheep Housing) (27ft x 54ft)
Additions (Sheep Housing) (27ft x 60ft)
Additions (Sheep Housing) (27ft x 66ft)
Additions (Sheep Housing) (27ft x 72ft)
Additions (Sheep Housing) (27ft x 78ft)
Additions (Sheep Housing) (27ft x 84ft)
Additions (Sheep Housing) (27ft x 90ft)
Covers (Sheep Housing)
Front Door (Sheep Housing)
Rear Door (Sheep Housing)
Was:

-

Total:

£2,100.00 inc VAT

Please reload page

Your Price

Was: -

Total: £2,100.00

inc VAT