30ft (9.15m) Wide

Specifications

  • Overall Height: 11ft
  • Straight Side: 3ft 3in
  • Head Room at 1ft in from Side: 5ft 5in
  • Distance Over Hoop: 43ft 6in
  • Steel Diameter: 60mm
  • Steel Specification: Z35 high tensile galvanised

A commercial polytunnel unit complete with all essential additions. No hidden extras – The items you need to construct a 30ft wide polytunnel are included as standard.

The design of the structure ensures outstanding performance in all conditions, using 60mm diameter steel hoops, and including LARGER diameter steel corner and roof stabilisers at each end for added structural security.

Timber Base Rails are required to fit the polytunnel cover – Trenching is not an option due to the distance over the hoop. Timber Base Rails are supplied as standard.

Also included is a Triple Ridge for additional and essential longitudinal strength.

Due to the size of this structure, the foundation tubes must be concreted in position.

Supplied as a complete unit ready for assembly onto a soil base and includes ALL of the following:

  • An all-steel framework – made using 60mm diameter hoops – including foundation tubes, hoops, corner stabilisers and roof stabilisers, and Triple Ridge.
  • Timber door frames and 8ft wide x 7ft high DOUBLE hinged doors at each end.
  • A NEW TO THE UK 720 gauge/180 micron Thermal Anti Drip polythene cover, which is 20% thicker than many other covers and has an extended 5-year warranty against UV degradation, and Anti Hot Spot Tape.
  • Timber Base Rails for fixing the polythene cover.

A full range of additions are also available and are highly recommended to enable you to customise and enhance your polytunnel to suit the needs of your chosen plants.

Select Length

Optional Extras

Step 1 - Select cover

 
Was
Now
Info

Thermal Anti Drip - 720 gauge Upgrade

-

£0.00

Close

Here at Premier Polytunnels we sell a clear Thermal Anti Drip polythene cover as standard. This is a 720 gauge/180 micron polythene film with a 5-year warranty against UV degradation and is the preferred cover of UK growers - supplied as standard with our commercial polytunnels.

Our Thermal Anti Drip (or Anti Fog as it is sometimes known) film is THE FIRST SOLD IN THE UK that includes NEW 5-layer co-extrusion technology.This 5-layer, 21st Century technology, which is unique to Premier Polytunnels, allows special chemical additives within the film to be divided more evenly throughout the layers, therefore reducing the effect of each additive upon the others and making for a more efficient polytunnel cover. These special additives help to greatly reduce many fungal and bacterial diseases that can damage plants.

The air inside a polytunnel has a high moisture content, causing water to evaporate and form droplets (or fogging) on the inside of the cover. Anti Drip additives within the film prevent large droplets forming and dropping back onto the plants, causing damage and disease to them.

The Thermal effect of the film prevents heat radiation being lost from the polytunnel, therefore maintaining a higher foliage temperature and drier plants, and leading to lower heating costs.

This film uses mineral additives to diffuse the light entering the polytunnel, ensuring that some light will make its way into the central and more shaded areas of the plants.

The film also includes Anti Dust additives on the top/outside layer, making it more difficult for dust to remain on the polythene and making it easier for the wind, rain, and your cleaning efforts to remove any accumulated dust from the polytunnel.

 

- or -

Net Polytunnel Cover

-

£537.00

Close
This green 47% shade net is ideal to be used on a polytunnel with or without a polythene cover in place. Used on its own a net cover provides shade, full ventilation, significant reduction in wind speeds, and still allows rainwater to filter through to the plants. It also provides excellent crop protection from birds and insects.
 
Placed over a polytunnel with a polythene cover in place, the net provides shade and significantly reduces the temperature inside.   
 
This net includes durable flat tape threads and double lockstitch tearproof technology to provide the ultimate woven shade product. Tested in the Middle East for UV life in excess of 10 years, this net has also proven its durability in the toughest of conditions.
 
Our net polytunnel covers are sewn together using a 5 thread overlocker sewing machine. The thread used has a high tensile strength and includes UV stabilisers to ensure the thread lasts the life of the net (8-10 year).
 
We highly recommend using Anti Hot Spot Tape on the metal framework prior to fitting the cover to protect the net from chafing.
 
Please note; When ordering your polytunnel, if you choose the net polytunnel cover option, a polythene cover will not be supplied. The net option is an alternative to polythene. 
 
If you would like a separate net polytunnel cover to be used over a polythene cover during the summer months, please do not hesitate to contact us on 01282 811250.

Step 2 - Select Front Door

 
Was
Now
Info

Commercial Double Doors

-

£0.00

Close

Double doors are supplied as standard on all of our commercial polytunnels, providing ample access for wheelbarrows, wheelchairs, etc.

Double doors on this polytunnel have an opening of 8ft wide x 7ft high.

Our doors have been designed with a timber frame and are hinged, therefore are much stronger and wind resistant than the roll-up blinds offered by many other companies.

Double doors use 3 x 2 timber, which is tanalised to preserve the wood and protect against rot, and are supplied with top and lower panels of polythene.

- or -

Commercial Sliding Doors Upgrade

-

£220.00

Close

Why not choose to upgrade the double hinged doors to double sliding doors at one end of your polytunnel?

Our doors have been designed with a timber frame and each door uses 3 x 2 timber, which is tanalised to preserve the wood and protect against rot. Each door is supplied with a top and lower panel of polythene. When open, sliding doors sit flush to the polytunnel.

At Premier Polytunnels it’s in the detail; unlike our competitors’, our aluminium sliding door lintel is supplied with specially designed plastic finishing end caps to protect your head from sharp corners.

Double sliding doors on this polytunnel have an opening of up-to-7ft 9in wide.

Supplied with all fixings and fastenings, including drop bolts and catches.

Step 3 - Select Rear Door

 
Was
Now
Info

Commercial Double Doors

-

£0.00

Close

Double doors are supplied as standard on all of our commercial polytunnels, providing ample access for wheelbarrows, wheelchairs, etc.

Double doors on this polytunnel have an opening of 8ft wide x 7ft high.

Our doors have been designed with a timber frame and are hinged, therefore are much stronger and wind resistant than the roll-up blinds offered by many other companies.

Double doors use 3 x 2 timber, which is tanalised to preserve the wood and protect against rot, and are supplied with top and lower panels of polythene.

- or -

Commercial Sliding Doors Upgrade

-

£220.00

Close

Why not choose to upgrade the double hinged doors to double sliding doors at one end of your polytunnel?

Our doors have been designed with a timber frame and each door uses 3 x 2 timber, which is tanalised to preserve the wood and protect against rot. Each door is supplied with a top and lower panel of polythene. When open, sliding doors sit flush to the polytunnel.

At Premier Polytunnels it’s in the detail; unlike our competitors’, our aluminium sliding door lintel is supplied with specially designed plastic finishing end caps to protect your head from sharp corners.

Double sliding doors on this polytunnel have an opening of up-to-7ft 9in wide.

Supplied with all fixings and fastenings, including drop bolts and catches.

Step 4 - Select No Doors and Frames

(if none required)

 
Was
Now
Info

No Doors and Frames - SAVE £££s

-

-£200.00

Close

For customers who may have a ready supply of timber and wish to make their own doors and door frames, Premier Polytunnels give you the option to remove our doors and door frames from each end of our polytunnels.

Please Note: Premier Polytunnels will still supply you with a 'Door Post Fixing Kit' to enable you to fix your door posts to the end hoops of the tunnel.

Step 5 - Select any additions you would like

The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel

 
Was
Now
Info
Cover Protection

Anti Hot Spot Tape Kit

-

£0.00

Close

This self-adhesive foam tape is a must on any polytunnel – We cannot recommend it highly enough. The tape is placed on the metal framework wherever the cover comes into contact, helping to prolong the life of the polythene sheet as it prevents cover degradation from friction and the built up heat on the framework. The smooth surface of the tape allows the cover to be pulled easily over the framework without catching or tearing during construction.

Foundations

Base Plate Kit (for hard standing base)

-

£175.00

Close

FOR FIXING POLYTUNNELS TO HARD STANDING.

These are used to replace foundation tubes when fixing a polytunnel to hard standing, such as concrete or flags. Cage bolts are supplied for fixing and the polytunnel framework simply slots into position.

Base plate kits are also supplied with angle brackets and cage bolts for fixing timber door posts to the ground.

If purchasing base plates, base rails MUST always be used.

Belt & Braces

Crop Bar Kit

-

£280.00

Close

These galvanised steel bars are placed horizontally across each of the intermediate polytunnel hoops above head height. They can be used to support hanging baskets, canes, shade net, lighting, irrigation, and many other uses. A further beneficial side effect of crop bars is added strength and stability to the polytunnel structure in extreme weather conditions, particularly on blustery and exposed sites.

These crop bars have additional supports up to the hoops.

Triple Ridge Kit

-

£0.00

Close

These extra ridge bars are placed on each side of the polytunnel's curved roof and run down the full length of the tunnel, exactly the same as the centre ridge which is supplied as standard. This Triple Ridge option adds further longitudinal strength to the structure. These side ridge bars are also suitable to be used for supporting hanging baskets, canes, etc, therefore positioning the baskets over the growing area and out of the way of paths.

These extra ridge bars can be positioned to suit your individual requirements, such as to avoid Crop Bars.

Supplied as standard with this polytunnel.

Cover Fixing (30ft Wide)
The Timber Base Rail Kit is included as standard with this polytunnel. This is reflected in the cost of the Aluminium alternative.

Timber Base Rail Kit

-

£0.00

Close

A timber base rail simply clamps around the base of the polytunnel framework, therefore doing away with the need for digging a trench and allowing the polythene cover to be simply fixed to this rail. Base rails are adjustable to allow for cover tensioning.

Foundation tubes MUST be concreted in position or Base Plates MUST be used when using this method of fixing to prevent the polytunnel frame from lifting.

Timber base rails are pressure treated with a wood preserver to protect against rot and the cover is fixed simply by using timber battens and nails.

Supplied as standard with this polytunnel.

- or -

Aluminium Base Rail Kit

-

£291.00

Close

An aluminium base rail simply clamps around the base of the polytunnel frame, therefore doing away with the need for digging a trench and allowing the polythene cover to be simply fixed to this rail. Base rails are adjustable to allow for cover tensioning.

The polythene is trapped into the aluminium with PVC infills which can be easily removed and reused should the polythene need re-adjusting or when the time comes to re-cover the polytunnel.

Because nails are not required, using aluminium base rails is more gentle on the polythene.

Foundation tubes MUST be concreted in position or Base Plates MUST be used when using this method of fixing to prevent the polytunnel frame from lifting.

Side Rail Kit (Left Side)

Timber Side Rail Kit (Left side)

-

£160.00

Close

Timber side rails are exactly the same as base rails, but these rails are placed around the polytunnel framework at the top of the straight sides. This allows for net ventilation, which is supplied by Premier Polytunnels, to be placed between the base rail and the side rail, with the main polythene cover stopping at the side rail. Side rails can be fitted along one side only or both sides.

Timber side rails are pressure treated with a wood preserver to protect against rot and the cover is fixed simply by using timber battens and nails.

- or -

Aluminium Side Rail Kit (Left side)

-

£458.00

Close

Aluminium side rails are exactly the same as aluminium base rails, but these rails are placed around the polytunnel frame at the top of the straight sides. This allows for net ventilation (supplied by Premier Polytunnels) to be placed between the side rail and the ground/base rail, with the main polythene cover stopping at the side rail.

The polythene and net are trapped into the aluminium with PVC infills which can be easily removed and reused should the polythene need re-adjusting or when the time comes to re-cover the polytunnel.

Ventilation Screen Kit (Left side)

-

£266.00

Close

When nature needs a little help, a polythene ventilation screen puts you in control, allowing you to create the environment which best suits your plants all year round.

The side ventilation (incorporated in our Side Rail kits) sometimes used on a polytunnel is not always required, especially in the colder months. To protect young or tender plants from frost damage or to maintain heat from an artificial source, it is often necessary to screen off the net ventilation.

Here at Premier Polytunnels we have designed a simple to use polythene screen which is rolled down over the side ventilation net. The ventilation can be screened off fully or partially, or can be left completely open depending on the amount of ventilation required.

A low ratio gearbox allows you to roll the screen up or down in seconds with the use of a simple handle that requires little effort. Operated from the inside of the polytunnel where the screen runs between the hoops and ventilation net.

This kit is a ventilation screen only, designed to be used in conjunction with a Side Rail kit.

Polytunnel Gutter Kit (Left side)

-

£151.00

Close

Here it is... the solution to collecting rainwater from your polytunnel.

With more than 30 years experience in the horticultural industry, we have used our expertise to bring you a water collection system for your polytunnel.

Designed in-house by our highly skilled and experienced team, and integrated into our polytunnel design, these gutters are designed to be used in conjunction with our timber or aluminium side rails. On aluminium side rails the gutters simply slot into place on either one or both sides of the tunnel. For fitting to timber side rails, a gutter carrier is screwed to the timber rails and the gutters simply slot into place. A stop end slots into the gutter at one end or, if you prefer, you can position the stop end at any point along the gutter and collect water at each end of your tunnel.

Long-lasting and aesthetically pleasing, our polytunnel gutters require no maintenance other than clearing them of debris occasionally.

Collecting rainwater is an easy, cost effective way of ensuring you can always keep watering.

This kit is a polytunnel gutter only, designed to be used in conjunction with a Timber Side Rail kit or our Aluminium Side Rail kit.

 

Side Rail Kit (Right Side)

Timber Side Rail Kit (Right side)

-

£160.00

Close

Timber side rails are exactly the same as base rails, but these rails are placed around the polytunnel framework at the top of the straight sides. This allows for net ventilation, which is supplied by Premier Polytunnels, to be placed between the base rail and the side rail, with the main polythene cover stopping at the side rail. Side rails can be fitted along one side only or both sides.

Timber side rails are pressure treated with a wood preserver to protect against rot and the cover is fixed simply by using timber battens and nails.

- or -

Aluminium Side Rail Kit (Right side)

-

£458.00

Close

Aluminium side rails are exactly the same as aluminium base rails, but these rails are placed around the polytunnel frame at the top of the straight sides. This allows for net ventilation (supplied by Premier Polytunnels) to be placed between the side rail and the ground/base rail, with the main polythene cover stopping at the side rail.

The polythene and net are trapped into the aluminium with PVC infills which can be easily removed and reused should the polythene need re-adjusting or when the time comes to re-cover the polytunnel.

Ventilation Screen Kit (Right side)

-

£266.00

Close

When nature needs a little help, a polythene ventilation screen puts you in control, allowing you to create the environment which best suits your plants all year round.

The side ventilation (incorporated in our Side Rail kits) sometimes used on a polytunnel is not always required, especially in the colder months. To protect young or tender plants from frost damage or to maintain heat from an artificial source, it is often necessary to screen off the net ventilation.

Here at Premier Polytunnels we have designed a simple to use polythene screen which is rolled down over the side ventilation net. The ventilation can be screened off fully or partially, or can be left completely open depending on the amount of ventilation required.

A low ratio gearbox allows you to roll the screen up or down in seconds with the use of a simple handle that requires little effort. Operated from the inside of the polytunnel where the screen runs between the hoops and ventilation net.

This kit is a ventilation screen only, designed to be used in conjunction with a Side Rail kit.

Polytunnel Gutter Kit (Right side)

-

£151.00

Close

Here it is... the solution to collecting rainwater from your polytunnel.

With more than 30 years experience in the horticultural industry, we have used our expertise to bring you a water collection system for your polytunnel.

Designed in-house by our highly skilled and experienced team, and integrated into our polytunnel design, these gutters are designed to be used in conjunction with our timber or aluminium side rails. On aluminium side rails the gutters simply slot into place on either one or both sides of the tunnel. For fitting to timber side rails, a gutter carrier is screwed to the timber rails and the gutters simply slot into place. A stop end slots into the gutter at one end or, if you prefer, you can position the stop end at any point along the gutter and collect water at each end of your tunnel.

Long-lasting and aesthetically pleasing, our polytunnel gutters require no maintenance other than clearing them of debris occasionally.

Collecting rainwater is an easy, cost effective way of ensuring you can always keep watering.

This kit is a polytunnel gutter only, designed to be used in conjunction with a Timber Side Rail kit or our Aluminium Side Rail kit.

 

Useful Growing Additions

Staging Support Kit (Left side)

-

£102.00

Close

Here at Premier Polytunnels we are very aware of the weight of a pot or tray when fully watered. It requires a significant amount of strength to support what could be hundreds of pots and trays down the length of a polytunnel.

Our staging supports clamp easily to each hoop of your polytunnel.

Staging supports for 30ft wide commercial polytunnels are made using 38mm diameter steel tube, and are 2ft 6in high x 3ft wide with a diagonal brace. Each support is supplied with a P Clip for fixing to 60mm diameter steel hoops.

All fixings supplied, including a fixing clamp (P Clip) for a top of your choice. Please note: These are support legs only and tops are not supplied.

Kits supplied are for the full length of one or both sides of your polytunnel. If you require fewer staging supports, they can be purchased individually from Polytunnel Parts in our Accessories pages.

Staging Support Kit (Right side)

-

£102.00

Close

Here at Premier Polytunnels we are very aware of the weight of a pot or tray when fully watered. It requires a significant amount of strength to support what could be hundreds of pots and trays down the length of a polytunnel.

Our staging supports clamp easily to each hoop of your polytunnel.

Staging supports for 30ft wide commercial polytunnels are made using 38mm diameter steel tube, and are 2ft 6in high x 3ft wide with a diagonal brace. Each support is supplied with a P Clip for fixing to 60mm diameter steel hoops.

All fixings supplied, including a fixing clamp (P Clip) for a top of your choice. Please note: These are support legs only and tops are not supplied.

Kits supplied are for the full length of one or both sides of your polytunnel. If you require fewer staging supports, they can be purchased individually from Polytunnel Parts in our Accessories pages.

Ground Cover Kit

-

£97.50

Close

This black, heavy-duty UVI ground cover acts as an effective weed control with less than 0.5% light transmission, while still allowing water to be easily dispersed through into the ground without collecting in puddles. Premier Polytunnels use 100gm ground cover – 10% thicker than most other ground covers. This ground cover is strong and tear resistant, easy to clean, and has grid lines for accurate pot spacing. The inclusion of UV stabilisers allows for a long effective life.

Irrigation Kit

Overhead Irrigation Kit

-

£172.00

Close

An overhead watering system is a simple and effective method of bringing water to your polytunnel, ensuring that the plants you have tended and nurtured receive just the right amount of water.

It is essential to consider the water SUPPLY and water PRESSURE when irrigating large areas, therefore Premier Polytunnels have used their expertise to design systems that you can rely on.

A polythene pipe fits to the roof of your polytunnel with sprinklers on drop tubes placed at approximately every hoop along the length, ensuring full coverage and avoiding dry spots. The pipe continues down the door post where it is connected to a garden hose.

Three irrigation lines run along the length of a 30ft wide tunnel, ensuring that the whole tunnel receives full coverage right up to the edge. 

The use of control valves allows you to make the best use of your water supply (which can vary from town to town and often month to month) and avoids waste by not watering unused zones.

- or -

Premier Irrigation Kit

-

£242.00

Close

Our Premier Irrigation kits are identical to our standard Overhead Irrigation kits, but are supplied with an adjustable pressure regulator, for those areas where water pressure is high.

The Premier kits also include a top of the range Galcon battery operated tap timer, doing away with the need for a watering can or even the presence of a person!

A hole punch is also supplied to make the correct size of hole in the low density pipe into which the Drop Pipes and Sprinklers fit.

With a Premier Irrigation kit you can go out to work or on holiday safe in the knowledge that the plants you have tended and nurtured will still regularly receive the right amount of water.

30ft Wide Lengths










30ft Wide Lengths
Front Door (27ft - 30ft)

Rear Doors (27ft - 30ft)

Covers (30ft x 30ft)

Covers (30ft x 36ft)

Covers (30ft x 42ft)

Covers (30ft x 48ft)

Covers (30ft x 54ft)

Covers (30ft x 60ft)

Covers (30ft x 66ft)

Covers (30ft x 72ft)

Covers (30ft x 78ft)

Covers (30ft x 84ft)

Covers (30ft x 90ft)

Additions (30ft x 30ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 36ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 42ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 48ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 54ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 60ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 66ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 72ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 78ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 84ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
Additions (30ft x 90ft)


















The Anti Hot Spot Tape Kit, Triple Ridge Kit and Timber Base Rail Kit are included as standard with this polytunnel
No Doors and Frames (27ft - 30ft)
(if none required)
Was:

-

Total:

£3,326.00 inc VAT

Please reload page

Your Price

Was: -

Total: £3,326.00

inc VAT